-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueAdditive Manufacturing
In this month’s issue, we explore additive manufacturing technology for the PCB fabricator: where it stands today, the true benefits, and where it seems to be headed.
The Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Estimated reading time: 2 minutes
The Bare (Board) Truth: Refining Output Data Packages for Fabricators
One of the biggest issues PCB fabricators face is the completeness (or incompleteness) of the data output package we receive from customers on a new PCB. In this column, I am going to present what is needed, from a fabricator’s perspective, for a good output package and why.
An Industry-wide Problem
In a recent I-Connect007 column, The Perfect Customer, my colleague Dan Beaulieu said that fabrication packages are frequently incomplete, thus delaying the quote process. I believe that this statement is true for ALL board fabricators! Dan also pointed out that many larger customers that previously had their own in-house PCB fabrication no longer have that ability, and as such, much of the tribal knowledge that was shared between their in-house fabrication and the engineering group in those days has disappeared. So, a lot of this board fabrication knowledge has not been passed on to the new generation of engineers and designers. This leads to incomplete or inaccurate output packages that lead to clarification questions prior to quote, which delay the quote process.
In this column, I will discuss which files are needed for fabrication and why.
The Basic “Must Haves”
Let’s start with the obvious.
Image Data
Many design software packages have multiple output types of image data. The four most common and accepted are the following:
1. ODB++ is Mentor’s data transfer format. Some of the benefits of outputting ODB++ are:
a) The IPC netlist is embedded in the data and need not be sent as a separate file.
b) Fabricators using Genesis are looking at a true apples-to-apples comparison; what I see on my screen is the same as what the end-user creating the ODB++ data sees. Oddly shaped pads rotated at unusual angles are not always interpreted correctly with some of the older CAM systems, but this is not an issue with ODB++ data.
2. Gerber 274X, Gerber data with embedded apertures, is by far the most common output.
3. Gerber X2 is the newest form of Gerber output. Not all fabricators are able to use this type of data. Much like the 274X data, X2 has the apertures embedded, and additional attributes added as well.
4. Gerber 274D is one of the older types of Gerber output. It requires the designer to send a separate aperture file list or wheel, and is a little more cumbersome than the X types of Gerber with the apertures embedded. With this type of Gerber data, the aperture list must be complete or you will get a phone call from the fabricator for potential unassigned D-codes in the file list or wheel.
To read this entire column, which appeared in the April 2018 issue of Design007 Magazine, click here.
More Columns from The Bare (Board) Truth
The Bare (Board) Truth: My Top Six Design ChallengesThe Bare (Board) Truth: Via Basics
The Bare (Board) Truth: 5 Questions About Improving Thermal Management
The Bare (Board) Truth: Teaching the Next Generation—An Overview of Today’s University Courses
The Bare (Board) Truth: Fabrication Starts With Solid Design Practices
Board Negotiations: Design Rules and Tolerances
The Bare (Board) Truth: Eliminate Confusion
The Bare (Board) Truth: Getting on the Same Page—A Data Story